Description
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Both connectors are industry standard parts - the four pin connector is an M12 circular connector and the 9 pin connector is a D-subminiature. They're available from a variety of sources - Amphenol, Molex, Norcomp, Pheonix Contact, etc.
Planning to make your own ULTIMATE harness? This plug and pin kit features the MS3Pro ULTIMATE AMPSEAL white, black & gray connectors, plus 100 pins- more than enough for making your own! (EVO/ 1st Gen 2-connector AMPSEAL Kit sold separately)
Add to cartThe MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 6000m...
Add to cartThe MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cartMany older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cartWe've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...
Add to cartUSB A to Mini B cable. Use this with the following products: MS3Pro EVO MS3Pro Ultimate CAN-EGT MS1 or MS2 V2.2 or V3.0 modified with DLP-TXRX mod kit We include this cable with MS3Pro EVO & Ultimate. Does not fit MS3 V3.0 or V3.57.
Add to cart
Reviews
There are no reviews yet.