Showing 17–32 of 43 results
-
Innovate Standalone Gauge Kit with LC-2 & Blue DB Gauge – 3795
$189.99Innovate Standalone Gauge Kit with LC-2 & Blue DB Digital Gauge Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with the ...
Add to cart -
Innovate Standalone Gauge Kit with LC-2 & Green DB Gauge – 3873
$189.99Innovate Standalone Gauge Kit with LC-2 & Green DB Digital Gauge. Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with th...
Add to cart -
Innovate Standalone Gauge Kit with LC-2 & Red DB Gauge – 3796
$189.99Innovate Standalone Gauge Kit with LC-2 & Red DB Digital Gauge Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with the p...
Add to cart -
Innovate MTX-AL analog wideband air/fuel ratio gauge – 38550
$235.99The Innovate Motorsports MTX-AL combines a stepper driven gauge and Innovate Direct Digital wideband control unit in a single, compact package. It offers the same proven wideband AFR as the MTX-L digital wideband, but with an analog gauge instead of a dig...
Add to cart -
Innovate MTX-L Plus Gauge – Sensor – Controller – 39180
$201.99Innovate Motorsports' New MTX-L PLUS wideband gauge features their patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these te...
Add to cart -
Innovate SCG-1 Wideband Gauge and Boost Controler – 3882
$418.99This combines four devices in one: It's a boost gauge; It's a wideband O2 sensor gauge; It's a boost controller; And it's a shift light, all in one package that fits in a 52 mm gauge pod. Since it knows both your boost pressure and your air/fuel ratio, it...
Add to cart -
Innovate DLG-1 Dual Lambda Gauge 38910
$308.99Innovate DLG-1 Dual Lambda Gauge Complete package with OLED display Includes two LSU4.9 sensors Monitor left and right exhaust banks on one single gauge! Perfect for all V configured engines Plug & Play setup for both O² sensor...
Add to cart -
Innovate Motorsports Wideband O2 Exhaust Clamp – 37280
$73.49Innovate Motorsports Exhaust Clamp - #3728 Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. We recommend this clamp for dyno and emissions testing in situations where ...
Add to cart -
O2 sensor flange for Toyota applications
$15.00While most oxygen sensors use an M18 threaded mount, many Toyotas from the '80s through 2005 used a two bolt flange to install their O2 sensors. Our Toyota style adapter flange allows you to swap in a wideband oxygen sensor without welding in an extra bun...
Add to cart -
Innovate Motorsports Extended O2 Sensor Bung – 37640
$11.53Mild steel extended length O2 sensor bung for smaller tubes. This is like our regular bung and plug kit, only it's 1" long, making it perfect for installing in headers or similar applications where the regular bung is too short for the shape of the pipe. ...
Add to cart -
Mild Steel M18X1.5 Thread Bung and Plug Kit – 37350
$10.59Mild Steel oxygen sensor bung and plug set, weld on and go. Fits wide band oxygen sensors and most narrow band oxygen sensors. Standard M18 x 1.5 thread.
Add to cart -
Innovate Motorsports HBX-1 Heat Sink Bung Extender – 37290
$82.54Innovate Motorsports HBX-1 Heatsink Bung Extender - #3729 The Bosch wide-band O2 sensors included with Innovate wideband packages is rated to operate at an exhaust gas temperature of < 1300 degrees (F), and a sensor housing temperature of < 900 d...
Add to cart -
Sealed resistor – 10K
$4.50We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cart -
Sealed resistor – 1K
$4.50We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...
Add to cart -
MAP Sensor – GM 3 Bar MAP Sensor
$78.00GM 3 Bar MAP Sensor aka Manifold Absolute Pressure Sensor. This sensor is good for up to 29psi of turbo/supercharger boost and is fully compatible with the MS3Pro ECU and all flavors of the MegaSquirt EMS / MicroSquirt EMS. Replaces GM Part Numbers 12...
Add to cart -
GM IAT Sensor with open element & pigtail
$24.49GM IAT Temperature Sensor with open element, includes 6" pigtail GM IAT (Intake Air Temperature) Sensor with open element is the recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These GM Intake Air Temperat...
Add to cart
