Cart

Quick Links

kit

Showing all 16 results

  • Innovate Standalone Gauge Kit with LC-2 & Blue DB Gauge – 3795

    4.5 out of 5
    $208.21

    Innovate Standalone Gauge Kit with LC-2 & Blue DB Digital Gauge Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with the ...

    Add to cart
  • Innovate Standalone Gauge Kit with LC-2 & Green DB Gauge – 3873

    5 out of 5
    $208.21

    Innovate Standalone Gauge Kit with LC-2 & Green DB Digital Gauge. Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with th...

    Add to cart
  • Innovate Standalone Gauge Kit with LC-2 & Red DB Gauge – 3796

    $208.21

    Innovate Standalone Gauge Kit with LC-2 & Red DB Digital Gauge Innovate Motorsports introduces their newest digital gauge option for those looking for affordable wideband monitoring. The Innovate “Standalone Gauge Kit” comes complete with the p...

    Add to cart
  • MegaSquirt V3.0 PCB Components Kit

    $142.99

    This MSx30-Guts kit includes all the capacitors, diodes, integrated circuits, resistors, transistors, ECU connectors, the tube of heatsink compound and a bit of jumper wire in a Megasquirt V3.0 kit. The kit does not include the V3.0 PCB, case, endplates, ...

    Add to cart
  • MegaSquirt-3 PCB3.0 Kit with MapDaddy4 Upgrade

    4.3333333333333 out of 5
    $539.00

    Important Note:  Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures.  We appreciate your understanding.   MegaSquirt-III Engine Management System w/PCB3.0 - Un...

    Add to cart
  • MegaSquirt-3 with PCB V3.0 Kit

    4.8888888888889 out of 5
    $449.99

    Included is a MegaSquirt-III Engine Management System w/PCB3.0 - Unassembled Kit Part # MS330-K This MS330-K kit includes everything you will need to build your MegaSquirt-3. The genuine B&G partial kit with V3.0 PCB, everything in the standard Bil...

    Add to cart
  • MegaSquirt-I Programmable EFI System PCB2.2 – Kit

    5 out of 5
    $197.00

    *This product or components that make up this product have reached End of Life.  The ECU is now discontinued - this page is for reference only. MegaSquirt-I with V2.2 Main Board MegaSquirt programmable EFI Engine Management System from Bowling and ...

    Read more
  • MegaSquirt-I Programmable EFI System PCB3.0 – Kit

    5 out of 5
    $999.00

    Part # MS130-K; MegaSquirt-I Programmable EFI System with V3.0 main board - Unassembled Kit with Black Case Important Note: The BIP373 coil driver is sold separately and is only required for direct coil control. If you are using coils with internal or ...

    Read more
  • MegaSquirt-II Programmable EFI System PCB3.0 – Kit

    4.8823529411765 out of 5
    $324.99

    Note:   Now using a brushed silver finish MS3 enclosure, which will help facilitate potential future upgrades from MS2 to MS3 without extra cost!  MegaSquirt-II Engine Management System with 3.0 main board - Unassembled Kit; Part # MS230-K The MS23...

    Add to cart
  • LS / LSX Engine IGN1A Smart Coil Bracket Kit

    $99.00

    Bolt-on LS Ignition Coil Brackets for IGN1A Smart Coils AMPEFI Billet Aluminum IGN1A Smart Coil brackets for LS Engine Valve covers.  These are the same billet brackets used in our MaxSpark Kit allowing you to bolt a set of 8 IGN1A Ignition Coils to fac...

    Add to cart
  • MegaSquirt-III Daughterboard Kit

    5 out of 5
    $230.00

    Upgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...

    Add to cart
  • MegaSquirt-III MS3X Expansion Card & Connector Kit

    4.8888888888889 out of 5
    $110.49

    Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs t...

    Add to cart
  • JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled

    4.8 out of 5
    $80.99

    Use this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...

    Add to cart
  • MS3 Realtime Clock Module

    $86.99

    Add a real time clock to give your MS3's SD card logs a time/date stamp. This module solders to the MS3X board on the included pin headers. Requires a lithium battery, not included due to shipping restrictions. It's compatible with the following batteries...

    Add to cart
  • MSPNP and DIYPNP IAT Sensor Kit – Steel Bung

    5 out of 5
    $39.99

    MegaSquirtPNP and DIYPNP IAT Temperature Sensor Kit - Steel Bung This is a simple kit to make it easier for you when removing your AFM/MAF when using a MegaSquirtPNP or DIYPNP. In many cases, the air temperature sensor is built into the MAF, so removin...

    Add to cart
  • MSPNP and DIYPNP IAT Temperature Sensor Kit – Aluminum Bung

    4.5 out of 5
    $39.99

    MegaSquirtPNP and DIYPNP IAT Sensor Kit - Aluminum Bung This is a simple kit to make it easier for you when removing your AFM/MAF when using a MegaSquirtPNP or DIYPNP. In many cases, the air temperature sensor is built into the MAF, so removing it will...

    Add to cart