- Sorry, this product cannot be purchased.
Showing 65–80 of 446 results
-
AXM-110 High Voltage Isolator
$68.99This module protects your engine or transmission controller from high voltage spikes being fed in through digital inputs. The AXM-110 module can take 1,500 volts peak and 33.5 volts continuous. Common uses for the AXM-110 high voltage isolator include: ...
Add to cart -
54 mm Optical Trigger Wheel for Nissan L28ET or VG30E
$29.00Convert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt in optical shutter wheel! This replaces the stock low-resolution Nissan trigger wheel that has four slits with a higher resolution 24-2 wheel crank trigger. Intended for use ...
Add to cart -
AXM-100 High Voltage Tach Adapter
$65.00Many older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cart -
MegaSquirt V3.0 PCB Components Kit
$142.99This MSx30-Guts kit includes all the capacitors, diodes, integrated circuits, resistors, transistors, ECU connectors, the tube of heatsink compound and a bit of jumper wire in a Megasquirt V3.0 kit. The kit does not include the V3.0 PCB, case, endplates, ...
Add to cart -
Ford Mustang Terminator Cobra SVT 2003-2004 MS3Pro PNP Plug and Play
$1,249.99Ford Mustang Terminator Cobra (2003-2004) Engine Management System. Make it 'RACE-READY' with MS3Pro Plug & Play! This Mustang Cobra ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost, controls your factory dashbo...
Add to cart -
Ford New Edge Mustang 1999-2004 MS3Pro PNP Plug and Play ECU
$1,249.99New Edge Mustang GT 1999-2004, 1999-2002 NA Cobra or 2003-2004 Mach1 owners-- Get your car truly 'RACE-READY' with MS3Pro Plug & Play! This ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost and is CAN enabled for ...
Add to cart -
**Sold Out** Perfect Tuning Universal Gauge MS3Pro, MS3, MS2
$319.00**THIS PRODUCT IS CURRENTLY SOLD OUT AND WE DO NOT HAVE AN ESTIMATE FOR RESTOCK** This tiny, gauge sized display can show up to eight sensor readings at a time, in the space you'd need for a standard gauge! Plus, this gauge monitors almost all your ECU...
Read more -
Bosch LSU 4.9 5-wire wide-band O2 sensor with 8′ cable – 38970
$129.08Bosch LSU 4.9 5-wire, wide-band O2 sensor with 8' cable bundle Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1. NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the ...
Add to cart -
Bosch LSU 4.9 5-wire wide-band O2 sensor – 38880
$86.883888Bosch LSU 4.9 5-wire, wide-band O2 sensor. Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1. NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector...
Add to cart -
Innovate 18′ Sensor Cable for LM-2 – 38280
$86.32Innovate 18 foot sensor cable for LM-2. Connects to LSU4.2 sensor. Also works with MTX-L and LC-2. For use in dyno cells, industrial applications, and other places where the standard cable just isn't long enough.
Add to cart -
Bosch LSU4.2 5-Wire, Wide-Band O2 Replacement Sensor – 37370
$100.31Bosch LSU4.2 5-wire, wide-band O2 sensor A replacement wideband sensor that plugs into an Innovate LC-1, LC-1, LM-1, or LM-2 wideband controller using a LSU 4.2 sensor.
Add to cart -
MS3Pro Module F1/F2 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cart -
Innovate Motorsports Wideband O2 Exhaust Clamp – 37280
$76.99Innovate Motorsports Exhaust Clamp - #3728 Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. We recommend this clamp for dyno and emissions testing in situations where ...
Add to cart -
MS3Pro Ultimate F4/F6 Replacement Fuse
$2.50The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 375...
Add to cart -
MS3Pro Ultimate & EVO F5 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 6000m...
Add to cart -
MS3Pro Gen1 F1/F2 & MS3Pro EVO F4 Replacement Fuse
$2.25The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cart