MicroSquirt 30″ Pigtail Harness

SKU: MicroHrns3

30″ Universal harness and serial cable for MicroSquirt (sold separately).  This package includes all the wiring normally included with the Microsquirt on its own for customers who happen to need a spare or replacement harness.

-

MS3Pro Mini Wiring Harness Upgrade (Microsquirt to Mini)

SKU: Mini-hrn_CK

If you have a previously installed Microsquirt harness and want to upgrade to MS3Pro Mini, the upgrade path is simple.  However, complete functionality will require a few basic changes to your Microsquirt Harness.  Our wiring upgrade kit contains the 7 pre-pinned, color-matched wire leads to make your conversion a snap! Includes (5) Injector C-G (2)…

-

Refurbished MicroSquirt CAN Transmission Controller with 4L60E Subharness

SKU: B_MS3Ph-Trans_4L60-PKG

Refurbished MicroSquirt CAN Transmission Controller with 4L60E Subharness includes: MicroSquirt Transmission Controller Complete 4L60E plug & play wiring harness 6 pin black connector for power, ground, and CAN bus 8 pin gray connector for additional inputs 18 crimp pins for the above connector ALL REFURBISHED ITEMS have been tested, repaired if necessary, re-tested and have passed…

-

MS3Pro LS 4L80E Trans Control Subharness

SKU: MS3Ph-Trans_4L80-K

Harness Only.  Optional automatic transmission control using our MicroSquirt transmission controller (sold separately).  Literally, just plug in our transmission controller with the 4L80E subharness and  you’re ready to control your trans via CAN with MS3Pro!

-

MS3Pro LS 4L60E Trans Control Subharness

SKU: MS3Ph-Trans_4L60-K

Optional automatic transmission control using our MicroSquirt transmission controller (sold separately).  Literally, just plug in our transmission controller with the 4L60E subharness and  you’re ready to control your trans via CAN with MS3Pro!

-

MicroSquirt Module Hardware Kit

SKU: MicroMod-hdr

All the hardware you need to attach your MicroSquirt Module to a PCB, all headers for the uS Module and the mainboard you would attach it too are included, along with standoffs and screws for security. (1) male and female 50 pin shrouded header (1) male and female 10 pin shrouded header (4) 4-40 7/16″…

-

MicroSquirt Wiring Harness – 8ft

SKU: MicroHrns8

Included is an 8′ long harness for installing the MicroSquirt on larger vehicles instead of motorcycles and ATVs. Serial cable included.

-

How to MegaSquirt your Toyota Supra Mk4 2JZ-GTE (JZA80)

MegaSquirt for the Mk 4 Toyota Supra, and other non VVTi Toyota 2JZ-GTE and 2JZ-GE applications The 2JZ engine gave the Toyota Supra a reputation as one of the top Japanese performance cars of the 1990s, and has also been a popular motor to swap into other platforms. DIYAutoTune’s 240SX land speed car is running…

**Sold Out** Perfect Tuning Universal Gauge MS3Pro, MS3, MS2

SKU: PT-Can-ga

**THIS PRODUCT IS CURRENTLY SOLD OUT AND WE DO NOT HAVE AN ESTIMATE FOR RESTOCK** This tiny, gauge sized display can show up to eight sensor readings at a time, in the space you’d need for a standard gauge! Plus, this gauge monitors almost all your ECU’s sensor readings, and can interrupt its display to…

-

MAP Sensor – GM 3 Bar MAP Sensor

SKU: GM3bar-map

GM 3 Bar MAP Sensor aka Manifold Absolute Pressure Sensor. This sensor is good for up to 29psi of turbo/supercharger boost and is fully compatible with the MS3Pro ECU and all flavors of the MegaSquirt EMS / MicroSquirt EMS. Replaces GM Part Numbers 12223861, 16040749 & 12223749 used commonly by GM, Buick, Cadillac, Chevrolet, GMC, and…

-