Showing 65–80 of 229 results
-
MegaSquirt V3.57 Case
$46.00This is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart -
DB15 Pigtail Harness
$23.99DB15 pigtail harness. Used for optional outputs on the expansion connector on V3.57 boards and for the V1.2 version of the MSPNP Gen 2 (the version with the red main board).
Add to cart -
DIYPNP Upgrade: Sequential Injection Kit
$43.99Add two extra injector drivers to your DIYPNP with this new module and the latest MS2/Extra code! We've partnered with JBPerf to develop this tiny module with two extra injector drivers. Allows for fully sequential injection on a 4 cylinder engine, semi-s...
Add to cart -
Replacement 277-1255-ND 10 Position Screw Terminal
$6.50Replacement 10 position block for relay board.
Add to cart -
Replacement 277-1249-ND 4 Position Screw Terminal
$4.99Replacement 4 position block for relay board injector power terminals.
Add to cart -
8 1/4″ 36-1 Trigger Wheel
$33.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and six radia...
Add to cart -
8 1/4″ 36-1 Trigger Wheel – No Slots
$33.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...
Add to cart -
6 3/4″ 36-1 Trigger Wheel
$32.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight rad...
Add to cart -
6 3/4″ 36-1 Trigger Wheel – No Slots
$32.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...
Add to cart -
4″ 36-1 Trigger Wheel
$26.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight radial locating s...
Add to cart -
4″ 36-1 Trigger Wheel – No Slots
$26.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth are 1/4" high, s...
Add to cart -
Crankshaft / Camshaft Position Sensor – Hall Effect Threaded Body
$102.99Crankshaft Position Sensor - Hall Effect Threaded Body Hall Effect Crankshaft position sensor with a threaded body, this sensor makes life easy-- it just works. Also makes a great camshaft position sensor, or for that matter, an 'anything that spins po...
Add to cart -
Crankshaft / Camshaft Position Sensor – Hall Effect tab mount
$37.50Crank Position Sensor - Hall Effect tab mount Hall effect crank position sensor (or camshaft position sensor, or wheelspeed, or driveshaft speed, anything that spins!). We've tested this with our 6.75" and 8.25" trigger wheels. We were able to get a rock...
Add to cart -
Variable Resistor P3C3103-ND – Stim Pot
$3.00Variable resistor P3C3103-ND, 10K This is the potentiometer (pot) used in the MSStim22 and JimStim kits, as well as the TransStim P1 and P2. If you need to replace a worn out one, get a new one here. Sold individually.
Add to cart -
VVTuner – Standalone VVT Controller for 2001-2005 Mazda Miata Engines
$229.00DIYAutoTune's VVTuner system is a standalone VVT (variable valve timing) controller for 2001-2005 MX-5 Miata engines. This system also translates the NB crank and cam sensor signals from the stock trigger wheels into NA style signals, making it perfec...
Add to cart -
MS Harness Extra Wire Kit
$8.99This 8' wire with pre-crimped terminal can be poked into our MegaSquirt DB37 harness if an extra wire is needed for additional I/O (MSHarness12, available separately). Made of the same TXL rated automotive grade wiring as the rest of our MegaSquirt wiri...
Add to cart
