Search Results for: map sensor
MAP Sensor – GM 3 Bar MAP Sensor
SKU: GM3bar-map
$78.00
GM 3 Bar MAP Sensor aka Manifold Absolute Pressure Sensor. This sensor is good for up to 29psi of turbo/supercharger boost and is fully compatible with the MS3Pro ECU and all flavors of the MegaSquirt EMS / MicroSquirt EMS. Replaces GM Part Numbers 12223861, 16040749 & 12223749 used commonly by GM, Buick, Cadillac, Chevrolet, GMC, and…
View Details-
Add to cartMapDaddy 4 Bar MAP Sensor with Barometric Correction
SKU: MapDaddy4
$99.99
Who’s Your MapDaddy? – MapDaddy 4 Bar MAP Sensor with Barometric Correction Ready to rock your ride handling up to 44psi of BOOST! New version has a 4 bar MAP sensor combined with a 1 bar barometric pressure sensor to improve barometric pressure resolution. The ‘MapDaddy’ 4-bar Manifold Absolute Pressure (MAP) Sensor upgrade for the…
View Details-
Add to cart4 Bar MAP Sensor (-1 to +3 Bar Map Sensor) & 15ft cable w/ 90° Boot Combo
SKU: LDM-899004-w_Piggy
$76.99
LowDoller Motorsports 4 bar MAP Sensor. (-1 bar to +3bar) Features 1/8″ NPT Thread Heavy Duty Stainless Steel body Accuracy 0.5% of full scale. Includes 4 bar (-14.7 PSI to +43.5 PSI) Absolute Pressure Sensor 15ft cable w/ 90° Boot Combo Sensor Input/Output Values Input 5V/Outputs 0.5V to 4.5V -14.5 PSI = 0.5 Volts…
View Details-
Add to cart3 Bar MAP Sensor (-1 to +2 Bar Map Sensor) & 15ft cable w/ 90° Boot Combo
SKU: LDM-899003-w_Piggy
$76.99
LowDoller Motorsports 3 bar MAP Sensor. (-1 bar to +2bar) Features 1/8″ NPT Thread Heavy Duty Stainless Steel body Accuracy 0.5% of full scale. Includes 3 bar (-14.5 PSI to +29 PSI) Absolute Pressure Sensor 15ft cable w/ 90° Boot Sensor Input/Output Values Input 5V -14.7 PSI = 0.5 Volts 29 PSI = 4.5…
View Details-
Add to cartMAP – GM 3 Bar MAP Sensor 6″ Pigtail
SKU: GM3bar_piggy
$12.49
Compatible with standard keying of GM’s 3-Bar Map Sensor. This plug features 6″ of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black – Sensor Ground Green – Signal to ECU Gray – 5 volt reference voltage from ECU…
View Details-
Add to cartGM 3Bar MAP Sensor Uncrimped Connector
SKU: GM3bar_conn
$9.00
Plug and pin set for a GM 3-bar MAP sensor. We include an extra pin and wire seal just in case you need it as well. Also available as a pigtail, if preferred.
View Details-
Add to cartMPX4250 2.5 Bar MAP Sensor
SKU: MPX4250AP-WS
$33.00
MPX4250AP MAP Sensor Standard 2.5 bar Map Sensor used in MegaSquirt PCB 2.2/3.0/3.57 ECUs. Good for 21-22psi of boost, or for NA usage in non-boosted applications.
View Details-
Add to cartInnovate SCG-1 Wideband Gauge and Boost Controler – 3882
SKU: INNVT-3882
$418.99
This combines four devices in one: It’s a boost gauge; It’s a wideband O2 sensor gauge; It’s a boost controller; And it’s a shift light, all in one package that fits in a 52 mm gauge pod. Since it knows both your boost pressure and your air/fuel ratio, it will automatically cut boost if you…
View Details-
Add to cartToyota MR2/Celica All-trac 3SGTE 1993-1995 MSPNP Gen2 Plug and Play ECU
SKU: MSPNP2-TS9395
$829.99
3SGTE MR2 Celica MegaSquirtPNP Gen2 Plug and Play Standalone Engine Management System Fits the following USDM cars with the 3S-GTE engine: 1992-1993 Toyota Celica All-Trac (GT-Four) with manual transmission 1993-1995 Toyota MR2 Turbo with manual transmission See the ECU part number listing at the end of this entry to check if a Toyota ECU not…
View Details-
Add to cartGM Closed Element CLT/Oil Temperature Sensor with Pigtail
SKU: CLTIATwPiggy
$22.99
GM Closed Element Coolant / Oil Temperature Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) or Oil Temperature Sensor on all vehicles. This sensor can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicles if there are severe vibration issues, but normally we would recommend an open…
View Details-
Add to cart