Search Results for: Crankshaft Position Sensor
Crankshaft / Camshaft Position Sensor – Hall Effect Threaded Body
SKU: HallThreaded-K
$102.99
Crankshaft Position Sensor – Hall Effect Threaded Body Hall Effect Crankshaft position sensor with a threaded body, this sensor makes life easy– it just works. Also makes a great camshaft position sensor, or for that matter, an ‘anything that spins position sensor’. Need to track VSS / wheelspeed? Driveshaft speed? This sensor will do the…
View Details-
Add to cartCrankshaft / Camshaft Position Sensor – Hall Effect tab mount
SKU: HallSensor
$37.50
Crank Position Sensor – Hall Effect tab mount Hall effect crank position sensor (or camshaft position sensor, or wheelspeed, or driveshaft speed, anything that spins!). We’ve tested this with our 6.75″ and 8.25″ trigger wheels. We were able to get a rock solid reading at over 19,200 RPM, which is as fast as our test…
View Details-
Add to cart3 Position GM Type MAF & LS1 Crank/Cam Sensor Pigtail
SKU: PC-2894F
$19.00
GM Mass Air Flow Sensor Pigtail – 3 position This 3 position pigtail fits certain 3 wire GM Mass Air Flow MAF sensors, as well as LS1 camshaft position sensors and crankshaft position sensors. See image to verify this is the GM MAF Connector you’re looking for! Replaces GM part number 12085495
View Details-
Add to cartAXM-120 VR conditioner
SKU: AXM-120
$70.00
The AXM-120 VR conditioner converts sine wave signals from a variable reluctor sensor into an easy to process square wave for your engine management or data logger.
View Details-
Add to cartMicroSquirt Module V2.2
SKU: MicroModl2.2
$284.00
MicroSquirt Module is a credit card sized engine management board! This board packs all the features of the MicroSquirt into a 3.5″ x 2.4″ PCB, with all components installed. This tiny ECU opens up unprecedented possibilities – there’s never been a standalone this tiny, or this adaptable. Got a racing series that allows any modification if…
View Details-
Add to cart6 3/4″ 36-1 Trigger Wheel – No Slots
SKU: TW36-1_675_NS
$32.00
Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4″ in diameter and 1/8″ thick, with a 1/2″ diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth are 1/4″ high, so this fits crankshaft pulleys up…
View Details-
Add to cart4″ 36-1 Trigger Wheel
SKU: TW36-1_4
$26.00
Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4″ in diameter and 1/8″ thick, with a 1/2″ diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight radial locating slots 1/4″ wide. The teeth are 1/4″ high, so…
View Details-
Add to cart4″ 36-1 Trigger Wheel – No Slots
SKU: TW36-1_4_NS
$26.00
Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4″ in diameter and 1/8″ thick, with a 1/2″ diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth are 1/4″ high, so this fits crankshaft pulleys up to 3…
View Details-
Add to cartCrimp Connector for IGN-4
SKU: IGN-4_wpk
$13.49
Crimp connector and pins for IGN-4 coil. This is a standard “junior timer” sort of connector that has other uses such as Bosch crankshaft position sensors and throttle position sensors. Like all of our ‘ready to crimp’ connectors, we include an extra terminal/pin, just in case.
View Details-
Add to cart6 3/4″ 36-1 Trigger Wheel
SKU: TW36-1_675
$32.00
Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4″ in diameter and 1/8″ thick, with a 1/2″ diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight radial locating slots 1/4″ wide. The teeth are 1/4″…
View Details-
Add to cart