Description
USB A to Mini B cable. Use this with the following products:
- MS3Pro EVO
- MS3Pro Ultimate
- CAN-EGT
- MS1 or MS2 V2.2 or V3.0 modified with DLP-TXRX mod kit
We include this cable with MS3Pro EVO & Ultimate. Does not fit MS3 V3.0 or V3.57.
$7.50
-
USB A to Mini B cable. Use this with the following products:
We include this cable with MS3Pro EVO & Ultimate. Does not fit MS3 V3.0 or V3.57.
What sort of USB plug does this one use?
There are no questions yet, be the first to ask something for this product.
10-pack of wire jumpers in 5 colors. These fit 0.1" headers and are used on the JimStim to make connections for testing additional circuitry. There are several other uses for them too.
Add to cartThis is a simple two-part kit with two 1/4w 27kohm metal film resistors to replace R4 and R7 in any MegaSquirt PCB2.2 or PCB3.0 ECU. This will allow for use of the stock Ford temperature sensors without recalibrating the MegaSquirt for the Ford sensors. N...
Add to cartTPS-3 Connector (Uncrimped) GM Style 3-pin TPS Connector complete with: the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cartIAC Valve Connector (Uncrimped) Complete with the connector, four pins, plus an extra pin (just in case)
Add to cartThe Zeal Engineering Daughterboard was designed and developed by Ken Culver, one of the authors of the MS2/Extra and MS3 firmware. We're proud to now offer this daughter card in kit form. It was originally developed for the FC RX-7, but we have found it...
Add to cartIncluded is an 8' long harness for installing the MicroSquirt on larger vehicles instead of motorcycles and ATVs. Serial cable included.
Add to cart
Reviews
There are no reviews yet.