Cart

Quick Links

Trigger Wheels

DIYAutoTune.com presents our line of 36-1 trigger wheels for use with the Megasquirt. The trigger wheels are laser cut from 11 gauge (1/8″ steel) and work with Megasquirt-I with the MSnS-E code, and Megasquirt-II with either the standard or MS2/Extra code. Use the spacers to put the trigger wheel out in front of dish-type pulleys. We’ve tested these wheels with both GM and Ford style VR type crankshaft position sensors. V3.0 and higher boards can read the sensor output directly, while a V2.2 board requires a Ford EDIS external module or added VR conditioner circuit.

Trigger wheels and spacers are unpainted steel and can be painted or powder coated to match your engine compartment.

EPA, CARB & Emissions Disclaimer- All ECU's are for race purposes only. It's your responsibility to remain in compliance with all federal, state, provincial, or other laws that apply to you.

Showing all 11 results

  • BMW E30 Camshaft Sensor Kit

    $159.00

    PLUG'N'PLAY BMW E30 Camshaft Sensor Kit Have you noticed that our new E30 MSPNPPro includes both SIX discrete injector outputs and SIX discrete ignition outputs on its rear auxiliary connector? It's all ready to run your engine sequentially, just as soon...

    Add to cart
  • 50mm Optical Trigger Wheel for Nissan SR20DET or KA24DE

    5 out of 5
    $29.00

    Convert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt-in 50mm Nissan Trigger wheel! This replaces the stock low-resolution Nissan trigger wheel that has four slits with a higher resolution 24-2 wheel crank trigger. Intended for u...

    Add to cart
  • 54 mm Optical Trigger Wheel for Nissan L28ET or VG30E

    5 out of 5
    $29.00

    Convert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt in optical shutter wheel! This replaces the stock low-resolution Nissan trigger wheel that has four slits with a higher resolution 24-2 wheel crank trigger. Intended for use ...

    Add to cart
  • 8 1/4″ 36-1 Trigger Wheel

    5 out of 5
    $33.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and six radia...

    Add to cart
  • 8 1/4″ 36-1 Trigger Wheel – No Slots

    5 out of 5
    $33.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...

    Add to cart
  • 6 3/4″ 36-1 Trigger Wheel

    4.5 out of 5
    $32.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight rad...

    Add to cart
  • 6 3/4″ 36-1 Trigger Wheel – No Slots

    4.8333333333333 out of 5
    $32.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...

    Add to cart
  • 4″ 36-1 Trigger Wheel

    5 out of 5
    $26.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight radial locating s...

    Add to cart
  • 4″ 36-1 Trigger Wheel – No Slots

    $26.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth are 1/4" high, s...

    Add to cart
  • Crankshaft / Camshaft Position Sensor – Hall Effect Threaded Body

    4.4285714285714 out of 5
    $102.99

    Crankshaft Position Sensor - Hall Effect Threaded Body Hall Effect Crankshaft position sensor with a threaded body, this sensor makes life easy-- it just works.  Also makes a great camshaft position sensor, or for that matter, an 'anything that spins po...

    Add to cart
  • Crankshaft / Camshaft Position Sensor – Hall Effect tab mount

    4.9166666666667 out of 5
    $37.50

    Crank Position Sensor - Hall Effect tab mount Hall effect crank position sensor (or camshaft position sensor, or wheelspeed, or driveshaft speed, anything that spins!). We've tested this with our 6.75" and 8.25" trigger wheels. We were able to get a rock...

    Add to cart