|
This high flow fuel pump delivers enough fuel to support a 1000 hp fuel injected motor at 45 psi fuel pressure. Suitable for carbed or EFI applications, and gasoline or alcohol. These pumps are American made and backed by a two year limited warranty. This pump is intended for racing or marine use only, and you'll need to install a high flow filter rated at 60 microns or better upstream of it to protect the pump. (SX Performance 41002 Recommended)
If you're building a motor in the 800 to 1000 hp range and don't want to deal with the fuel heating issues and extra current draw that can come from a pump with way more capacity than you need, this one can be just the ticket. If you're more familiar with the Aeromotive line, this one is about halfway between the 11103 Tsunami / 11106 and the A1000.
Click here for the manufacturer's instruction sheet for this pump.
- Supports carbureted engines up to 1300 HP and fuel injected engines up to 1000 HP at 45 PSI
- Ultra high-flow rates exceed: 80 GPH at 12 volts and 45 PSI, AND 120 GPH at 12 volts and 10 PSI
- Flow-thru design maintains maximum cooling, produces outstanding reliability, and provides consistent fuel delivery from idle to full throttle
- -10 AN inlet/outlet fittings for easy installation
- Can be mounted inside fuel cell or external
- For use with gasoline or alcohol fuel systems
- For race or marine use only
- Not for use with reduced sulfur content diesel fuel
- Passes UL standards for Coast Guard approval for use in marine applications
This is a pretty serious pump, suitable for a myriad of racing applications. The 1000 hp figure is for a naturally aspirated engine running 45 psi of fuel pressure; engines running more fuel pressure (such as turbocharged or supercharged motors) will need to adjust this downward as needed based on the chart below, and carbureted motors with lower fuel pressure can use this pump for up to 1300 hp. You can use the charts below to see how much fuel it flows at the pressure you need, and how much current it will draw.
SX Performance™ In-Line Electric Fuel Pumps are designed for high horsepower carbureted and fuel injected engines. Our high pressure fuel pump design moves higher volumes of fuel at a much greater velocity than our competitors. Now you can have the volume of fuel you need, where it’s needed, when it’s needed.Make no mistake about it, SX Performance™ has created the most reliable fuel pumps in the world today that handle high pressure/high volume or low pressure/high volume fuel systems.So no matter what you’re running, our pumps provide excellent flexibility letting you switch between fuel injected and carbsystems simply by changing the regulator.
|
