Description
16 pin connector with pre-crimped 8″ black wires. Included with MSPNP-MM9093 and MSPNP-MM9495 for extra inputs and outputs. Can also be used with DIYPNPN76-K, DIYBOB-N76K, or to repair a factory wiring harnesses.
Sealed connector for GM boost control solenoid. This connector is pre-crimped with a 6" pigtail. Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC Solenoid. We continue to offer these connectors for customers that ne...
Add to cartMegaSquirtPNP and DIYPNP IAT Sensor Kit - Aluminum Bung This is a simple kit to make it easier for you when removing your AFM/MAF when using a MegaSquirtPNP or DIYPNP. In many cases, the air temperature sensor is built into the MAF, so removing it will...
Add to cartThis pigtail has 10" leads and fits Ford TFI ignition coils. Used on 5.0 Mustangs, injected 351 Windsor motors, the 2.3 Turbo, various incarnations of the 3.8 V6, and many others. Just the thing if you're making a new wiring harness for your 5.0 or other ...
Add to cartMegaSquirt Wiring Bundle - 23" Long Perfect for creating your harness adapter (perhaps using a DIYBOB along with this) or for tying into your stock wiring harness! 23" TXL wire, color coded with labeling printed on the wire every 3 inches -- no ...
Add to cartBosch EV1 style Fuel Injector connector with uncrimped pins. Includes one connector and two uncrimped pins (actually, we throw a third pin in just in case) Fits a wide variety of cars that use Bosch injectors, including many Ford, GM, and BMW produ...
Add to cartTPS-3 Connector (Uncrimped) GM Style 3-pin TPS Connector complete with: the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cart
1 review for MSPNP 16 Pin Center Connector