MegaSquirt Wiring Harness - 10 feet long
We've completely redesigned our wire harness to get your fuel injection installation right the first time! This new version adds several new features to help make your installation as easy and reliable as possible.
- We now use a custom made twisted pair cable with a foil shield for ignition input, for maximum noise supression.
- Thumbscrews make it easier to tighten down in spots where you can't easily put a screwdriver.
- The wires for pins 3 through 6 have been added, for CANBUS or extra I/O.
- Choice of 2' or 10' lengths
- The injector wires now use two smaller wires instead of combining two pins into one large wire, reducing the number of splices needed in your harness.
- Wires are printed with both their function and their pin number.
- Dedicated sensor ground wire.
And, of course, we've kept the features you'd expect from one of our wiring harnesses:
- IAC and Ignition wire have been added for MS-I / MS-2 use or MS-3 Primary Harness Use
- 8' of TXL High temp automotive grade wire.
- Color coded wiring with labeling printed on the wire every 5 inches -- no paper tags here!
- All wiring is pre-crimped (NOT solder cupped!) to the DB37
- Heavy duty metal DB37 hood for superior RFI/EMI shielding (no cheap plastic 'metalized' hoods used on our harnesses)
- Wiring diagram included
- Simply the best MegaSquirt harness available anywhere, at any price
Click on the wiring diagram for a larger view.
Note that the Wiring Harness and Relay Cable are 'mutually exclusive', meaning they are not designed to be used together. If you are using the wiring harness then you are wiring everything directly back to the DB37 on the ECU with relays and fuses where needed. If you are using the Relay Cable you are connecting the DB37 on the ECU to the Relay Board directly (so there is nowhere to plug the harness in anymore) and you then wire everything directly to the screw terminals on the relay board. Our Wire Bundle comes in handy for installation with a Relay Board.